The Grommet & Tube Assembly (OEM) is needed when repairing your Refrirator appliance.The is a nuine OEM (Original Equipment Manufacturer) part from
Eventually parts can wear out on your appliance, when that happens trust nuine Replacement Parts to have the replacement part you need to fix your appliance. We are one of the top online options for replacement parts and repair. If you have the model number of your appliance that is different than what is being shown, please enter it at the top search bar for best results.
Follow the instructions in the owner's manual to install the part.
Product Dimensions: 10.65in x 7.1in x 7.6in
Product Weight: 1.095 lbs
Armature Kit for GE GCG21YESAFWW Refrigerator. Genuine product manufactured by GE. This ice dispenser solenoid stirrup is for refrigerators.
It attaches to the solenoid plunger to move the ice container deflector arm for dispensing crushed ice or cubed ice.
Safely store any food that could deteriorate while the power is off and unplug the refrigerator when installing this part. Wear work gloves to protect your hands.
Ice Cube Dispenser Solenoid-Service Kit, was replaced by . The new Part, #WR62X23154 (also manufactured by GE ) will be shipped upon ordering this product.
Electronic Ice Maker Kit (220V, international) for GE GCG21YESAFWW Refrigerator. Genuine product manufactured by GE.
For International 220-240V Models Only.
Ice Maker Stripper for GE GCG21YESAFWW Refrigerator. Genuine product manufactured by GE. This ice maker cube ejector is for refrigerators.
It rotates to push the ice cubes from the ice maker into the ice container.
Safely store any food that could deteriorate while the power is off and unplug the refrigerator before installing this part. Wear work gloves to protect your hands.
Refrigerator Damper Temperature Control for GE GCG21YESAFWW Refrigerator. Genuine product manufactured by GE. . Kit includes air damper, fan motor, nozzle, gasket, and instructions. The damper design has been revised to prevent freezing in the refrigerator section.
Ice Dispenser Chute Funnel Spring for GE GCG21YESAFWW Refrigerator. Genuine product manufactured by GE. This dispenser ice chute funnel spring kit is for refrigerators.
It provides tension to return the ice funnel back to its normal position after dispensing ice. The kit may include multiple parts; refer to your parts diagram for a complete list of parts included.
Unplug the refrigerator before installing this part. Wear work gloves to protect your hands.
Condenser Fan Motor Assembly for GE GCG21YESAFWW Refrigerator. Genuine product manufactured by GE. This condenser fan motor is for refrigerators.
It turns the condenser fan blade to move air across the condenser coil.
Unplug the refrigerator and safely store any food that could deteriorate while the power is off before installing this part. Wear work gloves to protect your hands.
Evaporator Fan Motor (models w/o thermistor wire) for GE GCG21YESAFWW Refrigerator. Genuine product manufactured by GE. This DC evaporator fan motor is used on those that DO NOT have a thermistor wired into the connecting harness. Some models have a thermistor wire and if your model has it, this product is not compatible.
Dispenser Door Recess Crank for GE GCG21YESAFWW Refrigerator. Genuine product manufactured by GE.
This dispenser door recess crank is a genuine General Electric part, sold individually. This dispenser door recess crank can be used as a replacement part for a refrigerator. The dispenser door recess crank is situated inside the dispenser assembly, and it facilitates the passage of filtered water from the dispenser assembly into a glass or mug. Symptoms of a damaged dispenser door recess crank include excessive condensation or sweating on the refrigerator door exterior, an ice maker that will not dispense ice, a door that will not open or shut properly, or excessive frost buildup. If any of these symptoms are occurring, they could be attributable to a damaged dispenser door recess crank. This damage could manifest in the form of punctures, holes, tears, nicks, scrapes, or erosion to the material. If this is the case, the component should be removed and replaced with this genuine OEM replacement part. The replacement will require a putty knife and a Phillips head screwdriver.This is an OEM part sourced directly from the manufacturer. It is sold individually. This dispenser door recess crank is compatible with the following appliance brands: General Electric, RCA, and Hotpoint.
Middle Drawer Slide Rail Cover for GE GCG21YESAFWW Refrigerator. Genuine product manufactured by GE.
Middle Drawer Slide Rail Cover WR02X10633 holds and supports the humidity control knob.
Wear work gloves to protect your hands when installing this part.
Glass Drawer Cover for GE GCG21YESAFWW Refrigerator. Genuine product manufactured by GE. Glass Drawer Cover fits into the crisper drawer cover frame and covers the crisper drawer(s).
Wear work gloves to protect your hands when installing this part.
The GE Grille Base (OEM) is needed when repairing your appliance.The WR-74X10270 is a genuine OEM (Original Equipment Manufacturer) part from
Eventually parts can wear out on your appliance, when that happens trust Genuine Replacement Parts to have the replacement part you need to fix your appliance. We are one of the top online options for replacement parts and repair. If you have the model number of your appliance that is different than what is being shown, please enter it at the top search bar for best results.
Follow the instructions in the owner's manual to install the part.
Product Dimensions: 4.75in x 7.55in x 12.4in
Product Weight: 1.745 lbs
The GE Grommet & Tube Assembly (OEM) is needed when repairing your Refrigerator appliance.The is a genuine OEM (Original Equipment Manufacturer) part from
Eventually parts can wear out on your appliance, when that happens trust Genuine Replacement Parts to have the replacement part you need to fix your appliance. We are one of the top online options for replacement parts and repair. If you have the model number of your appliance that is different than what is being shown, please enter it at the top search bar for best results.
Follow the instructions in the owner's manual to install the part.
Product Dimensions: 10.65in x 7.1in x 7.6in
Product Weight: 1.095 lbs
Ice Cube Dispenser Solenoid-Service Kit, was replaced by GE. The new Part, #WR62X23154 (also manufactured by GE) will be shipped upon ordering this product.
