Defrost Heater (w/ Bracket) - 220v for GE PCG23NGSBFWW Refrigerator. Genuine product manufactured by GE.
This Is For International Models Only, 220v 50hz.
The Grille Base (OEM) is needed when repairing your appliance.The WR-74X10270 is a nuine OEM (Original Equipment Manufacturer) part from
Eventually parts can wear out on your appliance, when that happens trust nuine Replacement Parts to have the replacement part you need to fix your appliance. We are one of the top online options for replacement parts and repair. If you have the model number of your appliance that is different than what is being shown, please enter it at the top search bar for best results.
Follow the instructions in the owner's manual to install the part.
Product Dimensions: 4.75in x 7.55in x 12.4in
Product Weight: 1.745 lbs
Evaporator Fan Motor (models w/o thermistor wire) for GE PCG23NGSBFWW Refrigerator. Genuine product manufactured by GE. This DC evaporator fan motor is used on those that DO NOT have a thermistor wired into the connecting harness. Some models have a thermistor wire and if your model has it, this product is not compatible.
Evaporator Fan Motor Dust Cap for GE PCG23NGSBFWW Refrigerator. Genuine product manufactured by GE. This evaporator fan motor dust cap is for refrigerators.
It prevents dust and debris from entering the fan motor bearing and housing.
Safely store any food that could deteriorate while the power is off and unplug the refrigerator before installing this part. Wear work gloves to protect your hands.
Refrigerator Damper Temperature Control for GE PCG23NGSBFWW Refrigerator. Genuine product manufactured by GE. . Kit includes air damper, fan motor, nozzle, gasket, and instructions. The damper design has been revised to prevent freezing in the refrigerator section.
Electronic Ice Maker Kit (220V, international) for GE PCG23NGSBFWW Refrigerator. Genuine product manufactured by GE.
For International 220-240V Models Only.
Water Filter (SmartWater) for GE PCG23NGSBFWW Refrigerator. Genuine product manufactured by GE. As per the manufacturer, this is an updated water filter. If you have never installed the updated filter or your old filter was made by Culligan, you may need the adapter to install the filter. Note: MWFP has been discontinued by the manufacturer. A substitution may be shipped in lieu of this product. The substitution may have a different design, but it will still be compatible with the same appliance models as the original part. It is not uncommon for manufacturers to discontinue parts and create substitutions. While the original part(s) and their substitution(s) may vary in appearance, they possess the same functionality. Please verify that your appliance model is compatible with this part before finalizing your order. GRP is not responsible for incorrect parts ordered.
Ice Dispenser Chute Funnel Spring for GE PCG23NGSBFWW Refrigerator. Genuine product manufactured by GE. This dispenser ice chute funnel spring kit is for refrigerators.
It provides tension to return the ice funnel back to its normal position after dispensing ice. The kit may include multiple parts; refer to your parts diagram for a complete list of parts included.
Unplug the refrigerator before installing this part. Wear work gloves to protect your hands.
Armature Kit for GE PCG23NGSBFWW Refrigerator. Genuine product manufactured by GE. This ice dispenser solenoid stirrup is for refrigerators.
It attaches to the solenoid plunger to move the ice container deflector arm for dispensing crushed ice or cubed ice.
Safely store any food that could deteriorate while the power is off and unplug the refrigerator when installing this part. Wear work gloves to protect your hands.
Dispenser Door Recess Crank for GE PCG23NGSBFWW Refrigerator. Genuine product manufactured by GE.
This dispenser door recess crank is a genuine General Electric part, sold individually. This dispenser door recess crank can be used as a replacement part for a refrigerator. The dispenser door recess crank is situated inside the dispenser assembly, and it facilitates the passage of filtered water from the dispenser assembly into a glass or mug. Symptoms of a damaged dispenser door recess crank include excessive condensation or sweating on the refrigerator door exterior, an ice maker that will not dispense ice, a door that will not open or shut properly, or excessive frost buildup. If any of these symptoms are occurring, they could be attributable to a damaged dispenser door recess crank. This damage could manifest in the form of punctures, holes, tears, nicks, scrapes, or erosion to the material. If this is the case, the component should be removed and replaced with this genuine OEM replacement part. The replacement will require a putty knife and a Phillips head screwdriver.This is an OEM part sourced directly from the manufacturer. It is sold individually. This dispenser door recess crank is compatible with the following appliance brands: General Electric, RCA, and Hotpoint.
Middle Drawer Slide Rail Cover for GE PCG23NGSBFWW Refrigerator. Genuine product manufactured by GE.
Middle Drawer Slide Rail Cover WR02X10633 holds and supports the humidity control knob.
Wear work gloves to protect your hands when installing this part.
Glass Drawer Cover for GE PCG23NGSBFWW Refrigerator. Genuine product manufactured by GE. Glass Drawer Cover fits into the crisper drawer cover frame and covers the crisper drawer(s).
Wear work gloves to protect your hands when installing this part.
The GE Grommet & Tube Assembly (OEM) is needed when repairing your Refrigerator appliance.The is a genuine OEM (Original Equipment Manufacturer) part from
Eventually parts can wear out on your appliance, when that happens trust Genuine Replacement Parts to have the replacement part you need to fix your appliance. We are one of the top online options for replacement parts and repair. If you have the model number of your appliance that is different than what is being shown, please enter it at the top search bar for best results.
Follow the instructions in the owner's manual to install the part.
Product Dimensions: 10.65in x 7.1in x 7.6in
Product Weight: 1.095 lbs
The GE Grille Base (OEM) is needed when repairing your appliance.The WR-74X10270 is a genuine OEM (Original Equipment Manufacturer) part from
Eventually parts can wear out on your appliance, when that happens trust Genuine Replacement Parts to have the replacement part you need to fix your appliance. We are one of the top online options for replacement parts and repair. If you have the model number of your appliance that is different than what is being shown, please enter it at the top search bar for best results.
Follow the instructions in the owner's manual to install the part.
Product Dimensions: 4.75in x 7.55in x 12.4in
Product Weight: 1.745 lbs
Ice Cube Dispenser Solenoid-Service Kit, was replaced by GE. The new Part, #WR62X23154 (also manufactured by GE) will be shipped upon ordering this product.
The GE MWF Water Filter (OEM) is needed when repairing your appliance.The MWF is a genuine OEM (Original Equipment Manufacturer) part from
Eventually parts can wear out on your appliance, when that happens trust Genuine Replacement Parts to have the replacement part you need to fix your appliance. We are one of the top online options for replacement parts and repair. If you have the model number of your appliance that is different than what is being shown, please enter it at the top search bar for best results.
Follow the instructions in the owner's manual to install the part.
Product Dimensions: 11in x 3.5in x 5.8in
Product Weight: 2.4 lbs
 - Genuine OEM")
