Front Drum Bearing Slide (White) for Kenmore 267.1532412 Washer/Dryer. Genuine product manufactured by Kenmore.
Note: The dryer's drum slides help to support the front of the drum as it rotates. If the drum slides are worn out, the dryer will be noisy. It is recommended replacing all of the slides together.
Drum Bearing Slide/Glide/Pad for Kenmore 267.1532412 Washer/Dryer. Genuine Product, GE manufactured the original product for your Kenmore 267.1532412.
Note: There are two of these needed on your dryer. These go on the inner most slots on the front bearing. Sold individually will need to purchase two. The drum slides support the front of the dryer drum instead of rollers or bearings. As they wear out the dryer will make more noise.
Trap Duct and Felt Kit for Kenmore 267.1532412 Washer/Dryer. Genuine Product, GE manufactured the original product for your Kenmore 267.1532412. This lint chute assembly is for dryers.
It houses the lint filter and channels exhaust air from the drum to the blower wheel.
Unplug the dryer before installing this part. Wear work gloves to protect your hands during the repair.
Gas Safety Thermostat (27 in) for Kenmore 267.1532412 Washer/Dryer. Genuine Product, GE manufactured the original product for your Kenmore 267.1532412.
Transmission and Support Assembly for Kenmore 267.1532412 Washer/Dryer. Genuine Product, GE manufactured the original product for your Kenmore 267.1532412.
Outer Tub Assembly (27 in) for Kenmore 267.1532412 Washer/Dryer. Genuine Product, GE manufactured the original product for your Kenmore 267.1532412. Special sales notes: ** Freight exception item. Freight charges will always apply. The freight charge will be assessed after the order has been placed.
Drive Motor and Pulley Kit for Kenmore 267.1532412 Washer/Dryer. Genuine Product, GE manufactured the original product for your Kenmore 267.1532412. Note: Wiring harness is encased in the styrofoam inside the box.
Basket Assembly - 27 Inch for Kenmore 267.1532412 Washer/Dryer. Genuine Product, GE manufactured the original product for your Kenmore 267.1532412. Special sales notes: ** Freight exception item. Freight charges will always apply. The freight charge will be assessed after the order has been placed.
Rotatory Knob Assembly (White) for Kenmore 267.1532412 Washer/Dryer. Genuine Product, GE manufactured the original product for your Kenmore 267.1532412.
Washer Tub-To-Pump Hose for Kenmore 267.1532412 Washer/Dryer. Genuine Product, GE manufactured the original product for your Kenmore 267.1532412. This washer tub-to-pump hose is for laundry centers.
It carries water from the washer tub to the drain pump.
Unplug the laundry center and shut off the water supply before installing this part. Wear work gloves to protect your hands.
Lactuator Lid for Kenmore 267.1532412 Washer/Dryer. Genuine Product, GE manufactured the original product for your Kenmore 267.1532412. This washer lid switch actuator is for laundry centers.
It presses the lid switch when you close the lid to start the washer.
Unplug the laundry center before installing this part. Wear work gloves to protect your hands.
Blower Wheel w/insert for Kenmore 267.1532412 Washer/Dryer. Genuine Product, GE manufactured the original product for your Kenmore 267.1532412. This dryer blower wheel is for laundry centers.
It attaches to the dryer drive motor shaft. It blows air through the drum and out the exhaust vent.
Unplug the laundry center before installing this part. Wear work gloves to protect your hands.
Agitator Screw and O-Ring for Kenmore 267.1532412 Washer/Dryer. Genuine Product, GE manufactured the original product for your Kenmore 267.1532412. This agitator screw and O-ring is for washers.
It attaches the agitator auger to the agitator base.
Unplug the washer before installing this part. Wear work gloves to protect your hands.
Dryer Idler Arm for Kenmore 267.1532412 Washer/Dryer. Genuine Product, GE manufactured the original product for your Kenmore 267.1532412. This dryer idler arm is for laundry centers.
It maintains proper tension on the dryer drive belt to spin the drum.
Unplug the laundry center before installing this part. Wear work gloves to protect your hands.
The GE LC Transmission and Basket Kit (OEM) 27 Inch is needed when repairing your appliance.The is a genuine OEM (Original Equipment Manufacturer) part from
Eventually parts can wear out on your appliance, when that happens trust Genuine Replacement Parts to have the replacement part you need to fix your appliance. We are one of the top online options for replacement parts and repair. If you have the model number of your appliance that is different than what is being shown, please enter it at the top search bar for best results.
Follow the instructions in the owner's manual to install the part.
Product Dimensions: 3.25in x 0.75in x 6.05in
Product Weight: 0.175 lbs